PRESIDENT Bill ASC, Руководство пользователя

Страница: 28 / 40

28
2 . Use
s
/
t
( 3 ) on the unit or UP / DN ( 3 ) on the microphone
to select the RG-BP menu.
3.
Press the
F
(
5
) key to confirm. The actual value blinks.
4.
Use
s
/
t
(
3
) on the unit or
UP
/
DN
(
3
) on the microphone
to change the value of the ROGER BEEP ,
On
/
Of
(default) .
5. Press again the F ( 5 ) key to confirm. Start again at point
2 to set another menu or...
6.
Press the
PTT
switch (
11
) to confirm and exit the
MENU
mode. disappears on the display.
7.
If no key is pressed, the unit exits the
MENU
mode after
10 seconds.
disappears on the display.
When the function is activated, “ ” appears on the
display.
4) EMG SETTING
Priority channels can be set to any channel in AM or FM
mode. To set a new emergency channel:
1. Enter into the
MENU
mode (see § MENU MODE , point 1
page 26)
2
. Use
s
/
t
(
3
) on the unit or
UP
/
DN
(
3
) on the microphone
to select the EMG-ST menu.
3.
Press the
F
(
5
) key to confirm. The first parameter (1 or 2)
blinks.
4. Use
s
/
t
( 3 ) on the unit or UP / DN ( 3 ) on the microphone
to set the emergency channel 1 or 2 .
5.
Press again the
F
(
5
) key to confirm. The second parameter
(the channel) blinks.
6.
Use
s
/
t
(
3
) on the unit or
UP
/
DN
(
3
) on the microphone
to set the channel .
7. Press the F ( 5 ) button to validate the selected channel.
The third parameter (mode) blinks.
8.
Use
s
/
t
(
3
) on the unit or
UP
/
DN
(
3
) on the microphone
to select AM or FM
mode
.
9. Press again the F ( 5 ) key to validate the Mode selection.
Start again at point 2 to set another function or...
10. Press the PTT switch ( 11 ) to confirm and exit the
MENU
mode. disappears on the display.
11.
If no key is pressed, the unit exits the
MENU
mode after
10 seconds.
disappears on the display.
The default emergency channels are channel 9 / AM
(EMG1) and channel 19 / AM (EMG2) respectively.
5) MIC TYPE
The PRESIDENT BILL can be used with either an electret
or dynamic 6-pin PRESIDENT microphone (see wiring the
microphone page 37) .
The Mic type can be defined as follows:
1. Enter into the
MENU
mode (see § MENU MODE , point 1
page 26)
2
. Use
s
/
t
(
3
) on the unit or
UP
/
DN
(
3
) on the microphone
to select the
MIC-TP
menu.
3. Press the F ( 5 ) key to confirm. The actual value blinks.
4. Use
s
/
t
( 3 ) on the unit or UP / DN ( 3 ) on the microphone
to change the type,
EL
(electret) /
Dy
(dynamic).
5.
Press again the
F
(
5
) key to confirm. Start again at point
2
to set another menu or...
6.
Press the
PTT
switch (
11
) to confirm and exit the
MENU
mode. disappears on the display.
English