PSP40
.
5
.
4.
4.
4.
4.
OPERATIONS
OPERATIONS
OPERATIONS
OPERATIONS
4.1
4.1
4.1
4.1 Power on / Power off scale
Power on / Power off scale
Power on / Power off scale
Power on / Power off scale
Place the scale on a flat, stable surface. Level the scale using the leveling bubble at the lower left side of the display.
With the weighing platter empty, press the ON/OFF
ON/OFF
ON/OFF
ON/OFF/ZERO
/ZERO
/ZERO
/ZERO key to power on the scale. The self-check will run, show the
version number “
”, display full capacity e.g. “F20.000kg” , at last, the scale will display a zero reading.
(Note: the proper (power-on zero-point) range is: (calibration zero-point) +20% FS).
To power off the scale, press and hold ON/OFF
ON/OFF
ON/OFF
ON/OFF/ZERO
/ZERO
/ZERO
/ZERO key.
4.2
4.2
4.2
4.2 ZZZZero
ero
ero
eroing the display
ing the display
ing the display
ing the display
You can press the
ON/OFF
ON/OFF
ON/OFF
ON/OFF/ZERO
/ZERO
/ZERO
/ZERO
key at any time to set the zero point from which all other weighing is measured. When
the zero point is obtained, the display will show the indicator for zero.
ZERO
ZERO
ZERO
ZERO key range is (power-on zero-point) +5% FS. ZERO function is only activated when the scale is in steady weighing
mode and this also clear the recorded tare weight, the ZERO indicator will be lighted on, NET indicator will be off. ZERO
function will be not activated when the current weight is not in the range of (power-on zero-point) +5% FS, and it will
display “
” or “
”, then back to previous weight reading.
4.
4.
4.
4.3333 Normal Weighing Mode
Normal Weighing Mode
Normal Weighing Mode
Normal Weighing Mode
When scale is powered on and back to 0, place the weighing objects on the platform. The display will show the weight and
the units of weight currently in use.
4.
4.
4.
4.4444 Taring
Taring
Taring
Taring
Zero the scale by pressing the
ON/OFF
ON/OFF
ON/OFF
ON/OFF/ZERO
/ZERO
/ZERO
/ZERO
key if necessary when reading is stable. The zero indicator will be on.
Place a container on the platform, a value for its weight will be displayed.
Press the TARE
TARE
TARE
TARE/UNIT
/UNIT
/UNIT
/UNIT key to tare the scale. The weight that was displayed is stored as the tare value and that value is
subtracted from the display, leaving zero on the display. The "NET" indicator will be on. As product is added only the
weight of the product will be shown. The scale could be tared a second time if another type of product was to be added
to the first one. Again only the weight that is added after taring will be displayed.
When the container is removed a negative value will be shown. If the scale was tared just before removing the container
this value is the gross weight of the container plus all product that was removed. The zero indicator will also be on
because the platform is back to the same condition it was when the
ON/OFF
ON/OFF
ON/OFF
ON/OFF/ZERO
/ZERO
/ZERO
/ZERO
key was last pressed.
Note: TARE range for this scale is up to 100%FS.
4.5
4.5
4.5
4.5 Switching measuring unit
Switching measuring unit
Switching measuring unit
Switching measuring unit
In normal weighing mode, press and hold Tare/U
Tare/U
Tare/U
Tare/Unit
nit
nit
nit key to switching the measuring units between lb, kg, g, oz, lb:oz.