Page 8 of 12
1.
1½”
Wall Stud
Goujon de mur
2.
3.
#6 - 3/4" screw
Vis no. 6 - ¾ po.
Feed the cable tie through each mounting
base and then through the locking
mechanism to tighten.
With the #6-¾” screw, attach one of the
mounting bases to one of the sides 1
inch from the top.
Attach the 2nd mounting base to the wall 2” lower than the one
on the cabinet
Important:
Find a wall stud and attach the mounting base with a
1½” screw (not included). If you cannot locate a stud, use an
approved wall mounting system
1”
Wall
le mur
Locking
mechanism
Securing Free-Standing Storage Cabinets to the Wall
Follow the step below to secure individual free standing cabinets to the wall.
For full installation of multiple cabinets (for a garage, utility or laundry room application) please
see the Installatin guide on pages 9-12