6
ELECTRICAL REQUIREMENT
WARNING: DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
DO NOT USE EXTENSION CORD.
Failure to follow these instructions can result in death, fire or electrical
shock.
Before you move your refrigerator-freezer into its final location, it is
important to make sure you have the proper electrical connection.
Recommended Electrical Grounding Method
AC115Volt /60Hz, AC only 10 ampere fused and properly earthed
electrical supply is required. It is recommended that a separate circuit
serving only this appliance be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do not use an extension cord.
NOTE:
Before performing any type of installation, disconnect the
refrigerator-freezer from the electrical source. When you are finished,
connect the refrigerator-freezer to the electrical source and reset the
control to the desired setting.
LEVELING
If the refrigerator-freezer is not leveled during installation. The doors
may not close or seal properly, causing cooling, frost, or moisture
problems. It is very important of the refrigerator-freezer to be level in
order to function properly.
To level your refrigerator-freezer you may either turn the adjustable foot
