Unpacking and Accessories Inventory
1. Remove all packing materials. This includes the foam
base and all adhesive tape holding the accessories both
inside and outside.
2. Inspect and remove any remaining packaging, tape or
printed materials before turning on the beer dispenser
.
Note:
Allow
refrigerator
to stand in an upright position for 2
hours before turning on the power.
Check all supplied accessories in the carton to be sure that all
pieces are present and in good condition. A checklist of
accessories is listed below for your reference.
Proper Location
•
To ensure that your refrigerator works at the
maximum efficiency it was designed for installation in
a location where there is proper air circulation,
plumbing and electrical connections.
•
Choose a location where the refrigerator will be away
from heat and will not be exposed to direct sunlight.
•
This refrigerator is designed for
indoor use only
and
should not be used outdoors.
•
This refrigerator is a freestanding design and should
not be placed in a built-in or recessed area.
The following dimensions are the recommended clearances
around
refrigerator
.
Sides......................3/4" (19mm)
Back...........................1" (25mm)
Structure Illustration
