2
△
Do not use boiling water, acid, chemical diluents, petrol and oil, or dirt-
removing powder.
△
Dry it after cleaning.
△
Use light soapy water when cleaning the door seal, apply a little talcum
powder on it after natural drying to extend its service life.
△
Use a soft cloth with water or a little detergent to clean the external surface.
Note, keep the power supply, electric cable and plug away from water to
avoid electric shock.
△
Except on common failures, those who are not service technician should not
take apart
and repair
the freezer on their own, to avoid worsening the trouble.
Unauthorized repair of electrical parts such as compressor or temperature
controller is forbidden.
Defrosting
△
Defrost for better freezing efficiency when the frost film in the cabinet is 4-
5mm thick.
△
When defrosting, turn off the power, take out the frozen foods, open the door
for warming and melting. Use soft cloth to absorb water and clean it up.
△
Do not use sharp metal tools such as steel brush to clean the frost film when
defrosting to avoid evaporator damage.
Troubleshooting
Breakdown
Case
Removal method
The indicator is not on.
The compressor does not start.
The plug is not
connected to the
socket.
Plug it.
No power
Connect the socket with
power.
The indicator is on, but the
compressor does not work and
only buzzes
The power voltage is
＜
98V.
Put a power-regulator with
more than 1000W power
together.
The compressor stops a minute
after starting, and restarts after a
few minutes, and so repeatedly.
The power voltage is
＞
132V.
The compressor works normally,
but the temperature in the cabinet
lowers too slowly.
The door is opened
too frequently.
Reduce opening times.
There is too much
food in the cabinet
and it is placed
improperly.
Place foods properly and
keep space between them
for cold air ventilation.
The frost film is too
thick.
Take out foods and
defrost.
The surface of the
condenser is too
dirty.
Stop and clean the
condenser.
The door does not
seal.
Adjust the door seal.
Содержание PFR740G
Страница 1: ......
