Premium Poly Patios Luxcraft Crestville CV-4CPG, Руководство пользователя

Страница: 2 / 2

4.
Attach (E) Bearing Supports to Glider Base Bear-
ing Arms using four 2 1/2" Screws on each side.
**Be sure to match all letters and/or numbers**
2 1/2" Screws
5.
Attach Armrest Assemblies to each side.
Assembly order is: Washer - Armrest Assembly - Washer - Large Nut
Washer
Washer
Armrest Assembly
Large Nut
7.
Attach (A) Seat Assembly to (B) Back Assembly
using four 2 1/2" Bolts. Use two bolts in center
support and one in top hole per outside supports.
**Be sure to match all letters and/or numbers**
8.
Slide assembled Seat & Back between Armrests
and install 4" Bolts in back upright and bottom
hole of seat assembly
on each side.
**Be sure to match all letters
and/or numbers**
9.
Attach seat to front leg using 3" Bolts and
Armrest to back support using 2 1/2" Bolts.
Repeat on opposite side.
*Hex Head Bolt require 2 Washers - between bolt head - product & nut - product.*
*Hex Head Bolt require 2 Washers - between bolt head - product & nut - product.*
*Hex Head Bolt require 2 Washers - between bolt head - product & nut - product.*
10.
Attach (J) Lintels to each side using 2" Screws.
**Be sure to match all letters and/or numbers**
2" Screws
6.
Attach (F) Headboard to (B) Back Assembly using
eight 1/2" screws on backside.
**Be sure to match all
letters and/or
numbers**
Outside
Center