VIO-100(200)/PC100 | User’s Manual
Chapter 2: Switches and Connectors
Step of Setting Power Ignition
Step 1:
To select power ignition by PC/CAR switch.
Step 2:
To configure the power off delay time, please check the Delay Time Setting Options in
advance.
Step 3:
To connect the power and ignition power
Example: Delay Time Setting for 5 minutes
1. If delay time set as “5 minutes”
2. The system will shut down 5 minutes later after turning off the vehicle.
Step 1
Pin 1-2 (Right): PC Mode
Pin 2-3 (Left): Power Ignition Mode
Switch 1 / 2 / 3
Power off delay time
ON / ON / ON
3 second
ON / ON / OFF
1 minute
ON / OFF / ON
5 minutes
ON / OFF / OFF
10 minutes
OFF / ON / ON
30 minutes
OFF / ON / OFF
1 hour
OFF / OFF / ON
2 hours
Step 3
Step 3
To connect the battery power and
ignition signal
Содержание VIO-100/PC100 Series
