Assembly:
•
Plug the power cord into the appropriate socket.
•
Plug the other end of power cord into the appropriate outlet.
•
Make sure all screws are secure and nothing is loose.
Operation:
•
Remove the machine from the box, and place the equipment on a safe stable
location near an electrical outlet. (110V unless made for 220V). Keep all
original packaging in storage.
•
Flip the back legs down to allow the slide warmer to stand.
•
Plug in the Slide Warmer into a standard 110V (or 220V if applicable) outlet
and turn on the power switch button. The light above the word “ON” (located
below “Set Temp LED screen”) will light to indicate the unit is working. The
Temperature display box will light up and indicate the actual temperature
(upper box) and the set temperature (lower box). This should let you know
the machine is on.
•
To adjust the set temperature, push the “Set” button. The top (larger) display
box will read SP. Use the up and down arrows
(▲ or▼) to adjust the
temperature to your desired setting. Allow ample time for the slide warmer
to warm up. Temperature range is from room temperature to 140
˚C
±
2˚ C.
Once the slide warmer reaches your predetermined set temperature, the heat
indicator light will turn off indicating that the heater is off and is holding at
that temperature.
•
To adjust the length of time you want the machine to be operating press the
“Set” button again and the top (larger) box will read “ST” (looks like “sr” in
the display box). You can now use the up or down arrow
(▲ or▼) and set
the machine to run for a specific amount of time or turn this setting to “0” to
run continuously.
•
Press the “Set” button again to return to the main display showing the Actual
and Set temperatures.
•
Place as many slides (up to 40), in one of the four rows to help warm slides.
5.
