OPERATING PROCEDURES
ATTACHING THE SNOW PLOW
NOTE:
BECAUSE OF THE DIFFERENCES IN ATTACHMENT MOUNTING METHODS AMONG
THE VARIOUS BRANDS OF SKID STEER LOADERS, IT IS IMPORTANT TO CONSULT YOUR
SKID STEER OWNERS MANUAL FOR THE PROPER ATTACHMENT MOUNTING METHOD.
1. Insert loader attachment plate into Snow Plow Mounting Bracket by driving the loader into the
mount frame.
2. Set the brakes and relieve hydraulic pressure before exiting the cab.
3. Secure all locking levers or pins in their proper position.
4. Connect two hydraulic hoses from the Snow Plow to the loader’s auxiliary hydraulic system.
5. Fully angle the Snow Plow Blade 6 times to purge any air in lines.
6. Test the lifting and angling functions in a safe and level area before using the plow.
7. You are now ready to operate your Premier Snow Plow.
REMOVING THE SNOW PLOW
NOTE:
BECAUSE OF THE DIFFERENCES IN ATTACHMENT MOUNTING AND REMOVAL
METHODS AMONG THE VARIOUS BRANDS OF SKID STEERS, IT IS IMPORTANT TO CON-
SULT YOUR SKID STEER OWNERS MANUAL FOR THE PROPER ATTACHMENT REMOVAL
METHOD.
1. Park the plow on a solid level surface with the blade straight across the loader.
2. Roll the loader’s tilt arms back and lower lift arms to lay attachment level and set the brakes
on the loader.
3. Stop the engine, release hydraulic pressure in hoses and disconnect auxiliary hoses.
4. Release locking levers or pins.
5. Start the engine and disengage loader mounting plate for snow plow mounting bracket.
Slowly drive the loader back away from the plow.
TRANSPORTING THE PLOW
Raise the blade to a position where it does not block your view forward. Transport the plow with
hydraulic flow off or in neutral to prevent accidental lowering of the plow.
WARNING:
Never adjust the blade position while driving.
6
