Premier SCR-4606TVD, Инструкция по эксплуатации

Страница: 21 / 59

P-20
When an FM stereo broadcast is
hard to receive
Press ST/MO button on the remote
control to select the MONO or STEREO
mode . (When Stereo mode is activated,
the ST symbol will appear . )
Selecting The Frequency Band
Touch the screen of “ BAND ” section
repeatedly to select the band , the
message will show in turn :
FM1 FM2 FM3
AM2(MW2)
AM1(MW1)
RADIO OPERATION
Touch the RADIO icon in home menu
to enter the RADIO mode:
Start Searching For a Station
During Radio mode, briefly touch “ ”
to increase frequency by one step of
channel spacing.
Briefly touch “ ” to decrease frequency
by one step of channel spacing.
Manual Search
Automatic Search
During Radio mode, touch and hold
(for more than 2 seconds ) either “ / ”
ICONS to start search for a radio station
automatically.
Storing Stations in Memory
Setting Memory
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
- Store in Memory
>Select the frequency band
>Select the station
In radio model,Longer press the sel
knob repeatedly to select LOC/DX,
then rotate the VOL knob to
choose
between the LOC and DX mode of Local
and Long-distance traffic news
.
To tune in strong-singnal FM
Station only (LO/DX function)
Listening to radio
1 1 87.50 87.50 106.10 106.10 4 4
2 2 90.10 90.10 5 5
107.00 107.00
6 6
88.50 88.50
98.10 98.10 3 3
87.50 87.50
MHZ MHZ
FM1 FM1
1 1 87.50 87.50 106.10 106.10 4 4
2 2 90.10 90.10
5 5
107.00 107.00
6 6
88.50 88.50
98.10 98.10 3 3
87.50 87.50
MHZ MHZ
FM1 FM1