Premier SCR-4329DUSD, Инструкция по эксплуатации

Страница: 9 / 26

Press CLK button (6), the current clock time is
displayed, display will returns to previous mode
when mode has not been adjust for 5 seconds.
Press and hold CLK button (6) for several seconds,
until the clock time is blinking,rotate the VOL button
(3) clockwise or anti-clockwise to adjust the hours,
press SEL button (3) to confirm the hours adjustment.
Then, rotate the VOL button (3) clockwise or anti-
clockwise to adjust the minutes. Press SEL button (3)
again for final confirmation.
RESET button (1) is placed on the housing and must
be activated with either a ball point pen or thin
metal object. (DO NOT use sharp object to avoid
damaging the unit.) The RESET button (1) is to be
activated for the following reasons:
- Initial installation of the unit when all wiring is
completed.
-All the function buttons do not operate
-Error symbol on the display
NOTE: If the problem continues to persist after pressed RESET button
(1), it is recommended to use a cotton swab soaked in isopropyl
alcohol to clean pin connector socket on the back of the front
panel.
08
SETUP
21