Premier SCR-4329DUSD, Инструкция по эксплуатации

Страница: 23 / 26

Press SEL button (3) to until “LOC” appears on display.
Rotate VOL knob (3) to turn on or off the loc function.
During radio mode, press and hold SEL Button(3)for
several seconds,frequency area will display in
following order:
Note : Frequency spacing selection available in radio mode ONLY.
While one of the forquency area display on LCD,
Rotate VOL knob (3) to swich to another frequency area.
[eg,USA (American) to EUR (Eurpoean) frequency area]
Individual Volume, Bass,Treble,Balance and Fader
settings are retained in memory for radio, CD(MP3)
and AUX modes.
Note:Volume level is always return to factory default setting each
time the unit is powered on.
Press MUT button (5) to cut down the sound output
“MUTE” blinking on the display, press it again to
release this mode and resume to previous volume level.
Point the remote handset to control the remote sensor
( 7 ).
Press the function keys on the remote handset to control
the system.
The LCD(15)can show the current working state of the
unit.
The LED lamp (17) will flashing if the front panel does
not install in the mail unit or improper installation.
GENERAL OPERATIONS
LOC
FREQUENCY SPACING
SOURCE AUDIO MEMORY
MUTE
REMOTE SENSOR
LCD DISPLAY
FLASHING LED
07
SETUP
22