Page 8
Page 9
MODE BUTTON
Press this button to select different mode , sequence as follow:
MODE PRIORITY
A) Tuner mode (Radio)
B) CDP / MP3 (only if a CD or MP3 disc is inserted)
C) USB (only if a USB drive is inserted)
D) SD / MMC (Only if a SD or MMC card is inserted)
E) CDC-CD Changer mode (only if this unit is equipped with this features)
Whenever a USB or SD/MMC is being inserted, unit will automatically switch to USB or
SD/MMC mode, does not matter the unit is currently in what mode.
When in USB or SD / MMC mode, if the USB or SD / MMC is being removed, unit will
automatically switch to radio mode.
DISPLAY BUTTON (DISP)
At Radio mode Press this button to view frequency of the station in listening and clock time .
Clock Adjustment
Under clock display mode, press DISP button until the LCD flashes, press VOLUME KNOB to
adjust hour & minute.
ENCODER VOLUME KNOB
When the Menu function is not activated, rotate this knob to change the volume level.
When Menu function is activated, rotate this knob to navigate through different menu items.
TUNING UP / DOWN BUTTON
Press this button to search for radio stations. Depends on whether SEEK1 or SEEK 2
mode is selected, different operations can be performed, refer to “SEEK MODE”
paragraph for detail.
BAND BUTTON
Press this button to change between band FM, MW(AM).
AUTO MEMORY STORE: press
AMS
button for more than 1 second to enter auto store mode. The
radio will automatically store 6 stations to the 6 preset memories of the current band. To stop auto
store, press
AMS
button again.
PRESET SCAN: Press
AMS
button for less than 1 second to scan all preset stations in the
memories of the current band and stay on each memory stations for about 5
seconds. The memory location indicator on the LCD will flash during the
process. To stop preset scan, press AMS button again.
AUTO MEMORY STORE / PRESET SCAN BUTTON (AMS)
SCAN BUTTON(SCAN)
Press this button,the radio will tune up to search stations,the available stations will blinking
and stay on the display for a few seconds.
RESET BUTTON
In case of Reset Button is located behind the front abnormal operation use a pencil tip or
other non-metallic object to press the re-set button Reset button is located behind the front
panel. Reset button is to be activated for the following reasons;
- Initial installation of the unit when all wiring is completed.
- All the control function buttons do not operate.
- Abnormal or error symbol shown on the display.
LIQUID CRYSTAL DISPLAY PANEL (LCD)
The LCD panel display the frequency, time and activated functions.
NOTE:
It is a characteristic of LCD panel that if subjected to cold temperatures for an extended
period of time, they will take longer time to illuminate than under normal conditions, in
addition, the visibility of the numbers on the LCD may slightly decrease. The LCD read-out
will return to normal when temperatures increase to a normal range.
STATION PRESET BUTTONS (M1-M6)
You can store & recall six preset radio stations by pressing M1-M6 buttons
TO STORE A STATION: 1) select a band (if needed)
2) select a station by tuning up / down button
3) hold a preset button which you want store the station for at least
2 seconds. The preset number will appear on the display
accompanied by a beeps sound.
TO RECALL A STATION: 1) select a band (if needed)
2) press a preset button briefly to recall the stored station.
RESET
RES
ET
Use this control to select stereo or monaural reception for FM radio stations. You can
sometimes improve reception of distant stations by selecting mono mode.
FM MONO / STEREO BUTTON (MONO)
LOCAL / DX BUTTON
This control can be used to change between Local and Distant (-DX) tuning mode. Local
mode improves reception in some areas where the signal is too strong.
LOUDNESS BUTTON
Use this LOUDNESS control to increase bass output.
