IMPORTANT SAFEGUARDS
When using electrical appliances, base safety precautions should always be followed
including the following :
•
Read all instructions.
•
Before plugging in the appliance, check that the electrical rating shown on the rating
plate corresponds with your household electricity supply.
•
To protect against risk of electrical shock, do not put appliance in water or other liquid.
•
Close supervision is necessary when any appliance is used by or near children.
•
Unplug from outlet when not in use, before putting on or taking off parts, and before
cleaning.
•
Avoid contacting moving parts.
•
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or electrical or mechanical
adjustment.
•
The use of attachments not recommended by the manufacturer may cause risk of
injury to persons.
•
This appliance is designed for commercial use.
•
Do not let cord hang over edge of table or counter
•
Always operate blender with cover in place.
•
Never put the power cord or plug into water for cleaning. Do not wipe the plug prongs
with damp cloth, nor plug in with wet hands.
•
Plug the appliance to the wall outlet properly & securely. Loose plug may lead to
overheat or electric shock.
•
Never let the appliance unattended.
•
Keep hands and utensils out of the container while blending to reduce the risk of
severe injury to persons or damage to blender. A scraper may be used but must be
used only when the blender is not running.
•
Do not run the appliance without loading in the blender jar.
•
To prevent spillage, do not put liquid in the blender jar exceeding the MAX line.
•
Do not expose the appliance to source of heat such as a radiator or sun shining
through a window. For good ventilation, do not place cloth underneath the appliance.
•
Always operate with the lid in place. When processing hot beverages, properly secure
the lid in place to avoid scalding due to spraying of hot liquids.
•
Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
•
Care is needed when handling cutting blades, especially when removing the blade
from the bowl, emptying the bowl and during cleaning.
•
If the motor has overheated, the temperature monitoring system will trigger and the
motor will stop. Switch off the appliance and let the motor cool down. The motor
temperature monitoring system resets after the blender is unplugged from wall socket
for 45 minutes. In this time, the blender can be used again.
•
The blade is very sharp, use caution when handling the blade. Do not attempt to
disassemble the blade assembly and touch any rotating parts.
•
Warning : Flashing light indicates ready to operate. Avoid any contact with blades or
moveable parts.
2
