Premier CM-5629, Инструкция по эксплуатации, Страница: 16 / 18

P-3
How to Use
1. Place on a flat, level surface.
2. Turn the lid counter-clockwise to open.
3. Pour in water. Make sure the water is above the "MIN" indicator and below the "MAX" indicator.
4. Place lid on top of urn and turk clockwise to lock into place.
5. Plug in the urn.
a. To brew coffee, place the percolater tube and filter basket in the tank and pour the desired amount of
coffee grounds into the basket.
b. Make sure that the percolater tube is fitted properly inside the coffee urn before operation.
6. The percolater filter and basket are not required for boiling water.
7. Switch ON.
a. The "HEATING" light will turn on to indicate the boiling process has begun.
8. Tilt faucet lever to dispense.
Boil Dry Protection & Manual Reset Button
Boil dry accidents are the result of boiling all the water out of an urn. These kinds of accidents shorten
component and product life in all water boiling appliances. To prevent boil dry accidents, this appliance
is equipped with a thermal limiter with a manual reset fun on (see below picture). If the water in the tank
is completely boiled away, the appliance will turn itself off (though the pilot light will remain on).To
decrease the chance of boil dry accidents, operators are advised to turn the appliance off when not in
use, especially overnight.
This appliance must be unplugged before it can be reset .
After unplugging, allow the appliance to cool down. Open the plastic bottom of the coffee urn and locate
the reset switch in the control section. Press this button, place the plastic bottom back on the urn, plug in
the appliance and switch the urn on. If the pilot light is on, the unit has recovered to normal working
condition. If the light is still off, unplug the appliance and repeat the process. Repeat this operation until
the urn returns to normal working condition. The manual reset is intended to protect the user and the
coffee urn. In case of repeat incidents, the metal layering in the urn may damage due to boiling dry,
which may also damage the thermal limiter and heating element beyond repair.