P-6
Connecting and aligning the transmitter
Attention: Position the transmitter with a minimum distance of 1 m to other electronic devices,
otherwise there is a risk of mutual disturbance. Point the upper section of the transmitter towards
the baby or object you want to monitor. Check that the baby or object is suitably displayed
on the receiver.
Night vision
The transmitter is equipped with 6 infrared diodes. This enables the transmission of pictures
from areas which are not illuminated. The night vision function is activated automatically when
the light conditions make it necessary.
When the night
−
time vision function is activated, the screen display on the receiver turns to
black and white.
O
PERATING THE
R
ECEIVER
Check the transmitter and receiver are working properly each time before the equipment is put
i
Switching the receiver on/off
Press and hold this button until the logo appears first then the image being taken by the
transmitter camera.
Press and hold the button for approx. 1 second to switch the unit off.
In the case of a low battery charge, the Power LED flashes slowly. Place the receiver
in the
Setting the volume
Use these buttons to adjust the volume to one of five settings or “Off”.
Setting the brightness
Press the button once.
This icon appears in the display.
Use these buttons to adjust the brightness to one of five settings.
Temperature option (setting the display unit)
In the lower right hand corner the temperature in the baby’s room is shown.
IMPORTANT INFORMATION The ideal temperature for a baby to sleep is 16ºC - 18ºC. Please
set or adjust the room temperature accordingly.
Press the button twice.
