Premier Pet GPA00-16344, Руководство по эксплуатации продукта

Страница: 6 / 12

6 +1 (866) 381-2785
Step 3
Cut Pet Door Opening
3A Drill
3
/
8
” holes in inside corners of drawn template. These will be
the pilot holes for the saw blade.
Helpful Tip: Use both hands to hold drill steady and straight at a
90° angle.
3B
Beginning in one of the holes just drilled, cut along the drawn
template lines. After cutting out the opening, you may need to recut
to square the opening. This is necessary for the pet door frame to
fit correctly.
Helpful Tip: Use proper saw blade length and type according to
door thickness and material (for example a wood blade for a wood
door and a metal blade for a metal door). Cut slowly using both
hands to hold the saw steady and straight at a 90° angle. This will
help prevent the blade from cutting unevenly between interior and
exterior sides of the door.
Step 4
Fit Plastic Core Covers
4A Measure the thickness (T) of your door. Note
this measurement.
4B Cut the grooved side of the plastic core covers to equal the
thickness (T) of your door + 7 /
8
”.
4C Place side of core covers with one rib (uncut edge) facing
inside and snap into tabs of interior frame (frame with flap).
Also, core covers may need to be trimmed to meet at corners.
Optional:
Use duct tape in the corners of core covers to help
secure in place and to improve weather resistance. Cut off any
excess tape.
3A
3B
NOTICE
Make sure there is nothing underneath the door where
you will be drilling the holes or cutting out opening.
4A
4B
4C