Premier Pet GDT00-16298, Руководство пользователя

Страница: 3 / 8

premierpet.com 3
How it Works
The Premier Pet
®
Remote Trainer can be used to both stop bad behaviors and teach your dog good
behaviors. The trainer has tone (beep), vibration and 99 levels of static simulation. The easy-to-use
design only requires a press of the action button and the signal is sent to the collar. A second collar can
be added to the same remote (extra collar sold separately) for a 2-dog trainer. The collar is waterproof.
• Tone: beeps to get your dog’s attention or mark a behavior.
• Vibration: vibrates the training collar.
• Static Stimulation: administers a stimulation with 99 levels of intensity.
What’s Included
Fit the Collar
Important: The proper fit and placement of your training collar is important for effective operation.
1. Start with the collar turned off and your dog standing
comfortably, not sitting.
2. Place the collar on your pet so that the Premier Pet
™
logo is right
side up and the collar is directly under your dog’s chin. Center
the contact points underneath your dog’s neck, touching the
skin.
NOTE: It is sometimes necessary to trim the hair around the
contact points to make sure that contact is consistent .
3. Check the tightness of the collar by inserting one finger between
the end of a contact point and your dog’s neck. The fit should be
snug but not constricting.
4. Allow your dog to wear the collar for several minutes, then
recheck the fit. Check the fit again as your dog becomes more
comfortable with the collar.
Do not shave the pet’s neck as this may increase the risk of skin irritation. The collar should not be worn for more than
12 hours out of every 24-hour period. Leaving the collar on too long could lead to skin irritation.
Contact
Points
LED
On/Off
Button
Charging Port
Mode
Indicator
Mode
Button
Action
Button
Up/Down
Buttons
Charging
Port
Dog 1/2
Indicator
Dog 1/2
Button
USB Charging Cable
Remote Training Collar Test Light Tool Long Contact Points USB Charging Cable
Remote Training Collar
Test Light Tool Long Contact Points