RTM-S
Page 10
Installation Instructions
6. Lower the universal bracket bar and display into the
cradle (as shown to the left).
NOTE
: The circular portion of the universal bracket bar
must rest inside the nylon sleeve. If seated
improperly, the operation of the RTM-S will be
hindered and the nylon sleeve will become
damaged.
7. Insert an M6 knurl knob into the knurl knob mounting
point and tighten.
8. OPTIONAL - Insert a M6 x 12mm security screw and
M6 lock washer into the mounting point and tighten
using the M5 Allen wrench (supplied).
9. OPTIONAL - Tighten the two (2) Phillips head
screws (located on the side of the mounting block)
to prevent the mount from rotating.
Locking Screws
Knurl Knob Mounting Points (a knurl knob may be
placed in either mounting hole).
Nylon
Sleeve
M6 x 12mm Security Head and M6 Lock Washer
Mounting Points (a security screw may be placed in
either mounting hole).
