www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Page 9
PTDM2
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
Attaching the Mounting Bracket to the Flat Panel
This section presumes that you have read and
understood these sections:
●
Selecting the Proper Mounting Hardware
●
Universal Washer Installation
●
Universal Spacer Installation
n
n
Place your flat panel screen-side down on a soft, flat
surface.
n
o
Identify the number and location of the thread
inserts on the back of your flat panel.
n
p
Align the holes on each mounting bracket with the
thread inserts on the back of your flat panel.
n
q
Secure each mounting bracket to your flat panel by
inserting a minimum of two (2) screws per bracket.
Do not overtighten the mounting hardware.
Proceed to the “Lock-It™ Security Barrel
Installation (Optional)” section.
Lock-It™ Security
Barrel
Locking Screw
Lock-it™ Security Barrel Installatin (Optional)
Optional security configurations include:
- PCB-CSL1 (sold separately)
- Padlock (Combination or Keyed; commercially
available)
Please read the following directions to install the
security barrel:
n
n
Remove the locking screw from the mounting
bracket.
n
o
Place the locking screw into and through the
security barrel (see illustration below).
n
p
Re-insert the locking screw and security barrel into
the mounting bracket.
n
q
Tighten the locking screw and security barrel until
seated in the mounting tab.
Do not thread the locking screw any further once
it is even with the mounting tab (see illustration to
the right). Threading the locking screw any further
will prevent you from safely attaching the flat
panel to the wall plate.
Do not overtighten the locking screw.
Proceed to the “Attaching the Mounting Bracket to
the Flat Panel” section.
Mounting Tab
