PSD-EB
Page 7
Assembly Manual
Installing the Backplate to the Adapter
NOTE
:
The back plate will vary depending on the system ordered. There are two (2) different systems for
this stand: PSM series (PDB-UWFB back plate) and CTM (back plate) series.
CAUTION
: Arrow must be pointing up prior to installation. Secure the following plates to the secured PSD-
SPA on the tubes.
1.
For the PDB-UWFB (PSM-Series) secure the back plate to the four (4) threaded mounting points found on
the PSD-SPA with the four (4) M10 x 12 bolts and flat washers (supplied).
2.
For the CTM-Back plate (CTM-Series) secure the back plate to the four (4) threaded mounting points
found on the PSD-SPA with the four (4) M10 x 12 bolts and flat washers (supplied) – (Figure 2)
Figure 2
CTM
Back Plate
M10 x 12 Hex
Head Bolts
(4ea)
M10 Flat
Washers (4ea)
PDB-UWFB
Back Plate
2” Tubes (2ea)
PSD-SPA
Arrows must be
facing up prior
to assembly
