Installation Guide
P4263T
This section requires two people.
Do not release your flat panel until you are certain that top and bottom
hooks of both mounting brackets are securely seated on the upper and
lower mounting rails of the wall panel.
Cette section exige deux personnes.
Éviter de relâcher votre écran plat jusqu’à
ce que vous vous assu-
riez que les crochets de haut et de bas de tous les deux supports
de montage sont bien posés sur les rails de montage hauts et bas
de la sablière.
Attaching the Flat Panel to the Wall Plate
Mounting Bracket Adjustment
1) Raise the flat panel past the top and bottom mounting rails on the wall
panel.
2) Slide the flat panel down slowly, keeping it close to the wall.
3) Engage the top and bottom mounting brackets to the rails of the wall
plate.
Proceed to the “Mounting Bracket Adjustments” section.
M6 x 35mm
Locking Screw
(1 per Bracket)
M6 x 30mm
Leveling Screw
(1 per Bracket)
Leveling Screw Adjustment
If your flat panel is tilted too far to one side, the leveling screws will allow you to
compensate for this tilt by simply adjusting the screws with a screwdriver.
Caution!
It is possible to dislodge your flat panel while you level your flat panel.
Use extreme caution until you tighten the locking screws.
Locking Screw Adjustment
After you have finished leveling your flat panel, be sure to tighten the two (2) M6 x 35mm
locking screws.
Do not overtighten the locking screws.
Attention !
C’est possible de retirer votre écran plat pendant son réglage.
User d’une extrême prudence jusqu’au moment du serrage des
vis de blocage.
Éviter de trop serrer les vis de blocage.
1) Loosen both locking screws.
2) Adjust the tilt of your flat panel.
3) Tighten both locking screws.
Page 10