Installation Guide
MVW463
www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
5
4
3
1)
Slide the MVW463 to the desired height on the dual-pole cart or stand.
2)
Insert four (4) M8 x 10mm set screws into the MVW463 screw holes near
the tubing (see drawing).
3)
Tighten the screws against the MVW463 and tubing.
Back-View Closeup of MVW463
Tubing of Cart or Stand
M8 x 10mm Set Screw
All flat-panel display illustrations are
shown for example purposes only.
•
If you are installing a
Samsung 460UT
or
Samsung 460UT-2,
attach four (4) 8mm quick-release buttons and four (4) M8 x 20mm
pan Phillips screws to the display’s back mounting holes.
•
If you are installing an
NEC X461UN
or
NEC X461UN2,
attach four
(4) universal spacers, four (4) 6mm quick-release buttons and four
(4) M6 x 30mm pan Phillips screws to the display’s back mounting
holes.
Do not over tighten the screws.
Attach the flat-panel display to either side of the MVW463 by inserting the
display’s quick-release buttons into the keyhole mounting slots on the MVW463,
locking them into place.
Depending on your videowall configuration, install displays working from the
bottom frame up.
The
Samsung 460UT
or
Samsung 460UT-2
should fit into the MVW463’s outer
keyhole mounting slots.
The
NEC X461UN
or
NEC X461UN2
should fit into the MVW463’s inner keyhole
mounting slots.
Keyhole Mounting Slot
Universal spacers are needed only for
the NEC X461UN or NEC X461UN2 to
prevent their display handle from hitting
the MVW463.
Page 6
