Phillips Head Screwdriver
Level
Required for installation
Warning Statements
MVW463
Installation Guide
www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Prior to the installation of this product, these installation instructions must be read and completely understood. Keep these installation instructions in an easily
accessible location for future reference.
Videowall Tolerance Disclaimer
Premier Mounts manufactures all videowall frames with a maximum tolerance of 0.015 inches between the mounting pattern and the frames outside perimeters.
Even though Premier Mounts provides different hardware options for precision alignments, alignment issues may occur due to higher tolerance levels for display
mounting patterns or the structural integrity of the mounting surface, which may react to the total weight of the attached structure.
Proper installation procedure by a qualified service technician must be followed, as outlined in these installation instructions. Failure to do so could result in
property damage, serious personal injury, or even death.
Safety measures must be practiced at all times during the assembly of this product. Use proper safety equipment and tools for the assembly procedure to
prevent personal injury.
Premier Mounts does not warrant against damage caused by the use of any Premier Mounts product for purposes other than those for which it was designed or
damage caused by unauthorized attachments or modifications, and is not responsible for any damages, claims, demands, suits, actions or causes of action of
whatever kind resulting from, arising out of or in any manner relating to any such use, attachments or modifications.
At least two qualified people should perform the assembly procedure. Personal injury and/or property damage can result from dropping or mishandling your
electronic equipment.
Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there are no electrical wires on the floor.
Cutting or drilling into an electrical line may cause serious personal injury.
This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious personal injury.
Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of impact.
Do not install on a structure that is prone to vibration, movement or chance of impack. Failure to do so could result in damage to the flat-panel and/or
damage to the mounting surface.
Tape Measure
Ladder
Rigging Hardware
M6 Allen Wrench
Heavy-Duty Steel Tube Long Enough
to Hang MVW463(s)
Page 2
