Page 9
Mounting bracket adjustments are factory preset (
see note
).
This section requires two people.
Do not release the flat-panel prematurely. The top and bottom
hooks of both mounting brackets must be securely seated on
the upper and lower mounting rails.
1)
Raise the flat-panel past the top and bottom mounting rails on the
wall panel.
2)
Slide the flat-panel down slowly, keeping it close to the wall.
3)
Engage the top and bottom mounting brackets to the rails of the
mount.
Attaching the Flat-Panel to the Mount
Note:
The registers
must align prior to
installation.
Neutral Position
(factory preset).
The locking safety screws keep the flat-panel from being
accidently dislodged from the mount.
1)
Locate the pre-installed security locking safety screw at
the bottom of each of the mounting brackets.
2)
Use the M5 Allen driver (supplied) to tighten the locking
safety screw.
Locking Safety Screw Installation
Do not overtighten the locking safety screws.
Note: Tighten screw to surface, then tighten 1/4” turn
Pre-installed
Locking Safety Screw
( 1 per Bracket )
ONLY TIGHTEN AFTER
FINAL ADJUSTMENT
Installation Guide
LMVLF
www.premiermounts.com | North America 800.368.9700 | Interna1-714-632-7100
5
6
