Page 10
LMVLF SPACER
Use the
GAPit GO/No Go Gauge
as a final step in the process to inspect and adjust the gap to
prevent costly replacement
and
extend the lifespan of the displays.
For more information,
please visit:
www.mounts.com
1. Swipe GAPit along vertical gap
2. Inspect for .050” gap & adjust if needed
3. Swipe GAPit along horizontal gap
4. Inspect for .050” gap & adjust if
needed
Installation Guide
LMVLF
www.premiermounts.com | North America 800.368.9700 | Interna1-714-632-7100
OPTIONAL FOR EASE OF INSTALLTION
Model-specific spacers are available for most flat-panel displays. Engineered with the intent of significantly
reducing installation time on large video wall array. Contact customer service to inquire about model specific
spacers.
1.
Align the corner register tabs of the mount and spacer then temporary secure the spacer in place.
Use commercially available hardware.
2.
Set the following mount on the next register corner tabs and mark its mounting location.
3.
Reutilize the same spacer as many times as needed to complete the video wall matrix.
LEVEL
LEVEL
Mounting
holes
