Page 6
Visit the Premier Mounts website at www.mounts.com
Installation Instructions
Ceiling Attachment
Solid Surface
Wood Stud
➊
Determine the mounting location.
➋
Use a 1/8” drill bit to pre-drill the mounting holes.
➌
Secure the four (4) ¼” eye lag screws to the wood
stud in the ceiling.
➍
Run the open end of the
1
/16
˝ braided cable
through
the hole in an eye lag screw.
➎
Run the open end through the loop.
➏
Pull the open end down until the
1
/
16
˝
braided cable
tightens around the eye lag screw.
➐
Repeat steps 4-6 for the remaining three mounting
points.
The ceiling box must be secured using the Quick
Locks and
1
/16
˝ braided cables (supplied).
➊
Determine the mounting location.
➋
Use a ¼” concrete drill bit to drill the mounting holes.
➌
Place the concrete eye anchor bolts into the pre-
drilled holes and gently tap into place using a rubber
mallet or hammer.
➍
Run the open end
1
/16
˝ braided cable
through the hole
in an eye anchor bolt.
➎
Run the open end through the loop.
➏
Pull the open end down until the braided cable
tightens around the eye anchor bolt.
➐
Repeat steps 4-6 for the remaining three mounting
points.
Wood Stud Ceiling
Concrete Ceiling
Eye Lag Screw
Eye Anchor Bolt
GB-AVSTOR5
➊
Determine the desired location where the
GB-AVSTOR5 is to be located.
➋
Remove the ceiling tile where the ceiling box will be
mounted.
Store the ceiling tile in a safe location in the event
that it needs to be reused.
Ceiling Tile
Ceiling Box Installation