ECM-3763T
Page 12
Visit Premier Mounts website at http://www.mounts.com
Installation
Instructions
Cable Management
Route the cables through the cable access holes and to
their respective locations. Remove the plastic covers,
route the cables, and gently re-attach the plastic covers.
The cables may then be routed through the bracket, up
the ceiling adapter and into the ceiling to a
predetermined power source.
Proceed to the
“Tilt Positioning”
section.
Source or
A/V Cable
Attaching the Decorative Covers
When attaching the decorative covers, verify that
the smaller mounting hole is above the larger
mounting hole.
Place
the
fi
rst decorative cover over the
fi
rst
mounting bracket arm and push
fi
rmly into
place.
Align the mounting holes together.
Insert the M4 x 6mm Phillips screw (smaller
mounting
hole).
Insert the M6 x 25mm Phillips screw (larger
mounting
hole).
Use a screwdriver to tighten all decorative
cover mounting hardware.
Repeat Steps 1 through 5 for the remaining
decorative covers and mounting bracket arms.
Do not overtighten these screws
Proceed to the
“Cable Management”
section.
Decorative
Cover
M4 x 6mm Screw
M6 x 25mm Screw
Screwdriver
