Source or
A/V Cable
Decorative
Cover
M4 x 6mm
Screw
M6 x 25mm
Screw
Screwdriver
9
8
Route the cables through the cable access holes and to their
respective locations. Remove the plastic covers, route the cables, and
gently re-attach the plastic covers.
The cables may then be routed through the bracket, up the ceiling
adapter and into the ceiling to a
predetermined power source.
When attaching the decorative covers, verify that the
smaller mounting hole is above the larger mounting hole.
Place the first decorative cover over the first mounting
bracket arm and push firmly into place.
Align the mounting holes together.
Insert the M4 x 6mm Phillips screw (smaller mounting
hole).
Insert the M6 x 25mm Phillips screw (larger mounting
hole).
Use a screwdriver to tighten all decorative cover
mounting hardware.
Repeat Steps 1 through 5 for the remaining decorative
covers and mounting bracket arms.
Do not overtighten these screws
