User Manual for
PHMDVR-X3
Version: 2.67
©
Copyright by
Premier Hazard Ltd.
All rights reserved.
39 / 68
VIDEO TYPE: Changing Video standards to PAL or NTSC. The default setting is NTSC
RECORD MODE: Setting for the Record mode, three modes are available as following:
GENERAL: Continuous recording at all times after power up.
TIMER: PHMDVR-X3 will start and stop recording at defined times based on the schedule settings
configured in the SETTINGS->RECORD->SCHEDULE menu
EVENT: PHMDVR-X3 will record in response to an alarm input signal. The alarms are triggered by
various I/O peripherals and Sensors connected to the MDVR-2. These are all configurable
NORMAL REC RATE: Two options are available:
NORMAL: PHMDVR-X3 will record at the frame rate and resolution as setup in RECORD->RECORD
SETTING.
1 FRAME: PHMDVR-X3 will only record at one frame per second without Audio in order to take less space
on the hard drive. If an alarm input signal is received, the PHMDVR-X3 will record at the frame rate and
resolution as configured in RECORD->RECORD SETTING.
When an Event is triggered, PHMDVR-X3 will always record according to the values that are
set in SETTINGS->RECORD->RECORD SETTINGS. So you always have good quality for
Events.
ALARM PRE-REC TIME
（
1-60
）
MIN: Pre-record time setting from 1 to 60 minutes. For example: If the
setting for pre-record is 30min, when alarm is triggered at 10:30, then the record file will start from 10:00
ALARM DURATION
（
3-30
）
SEC: The settings for consecutive and successive Alarms. Example: If we
set the duration to be 5 sec, then multiple Alarm events triggered within 5secs will be treated as 1 Alarm
event
ALARM POST REC
（
30-1800
）
SEC: Alarm post recording time setting. The time for which the
PHMDVR-X3 will continue recording after the alarm signal is removed.
The total Alarm Footage duration will be = Alarm Pre-Rec. Time + Time for which the alarm
signal is p Alarm Post-Rec. Time
ALARM TIME in sec (for Buzzer): Time for which the MDVR-2’s internal audio buzzer will activate in
response to an alarm signal.
