D
C
PLEASE NOTE: Although your Dune Buggy Spinner is constructed with UV resistant SunTex
TM
fabric, it is recommended that you take it inside
during storms and harsh weather to preserve its durability.
E
Support
Pole
Ground
Stake
ferrule
Step 3
Slide the Spinner Axles onto the Wheel Strut Assemblies. Tighten knobs on the "T"
Joints to hold the Axles to the Struts. (Diagram C)
Step 4
Take one of the four Spinner Wheels and slide it onto the Spinner Axle. Slide second
Spinner Wheel onto Spinner Axle. (Note: Spinner Wheels on same axle should
spin in opposite directions. Before putting second Axle Cap into place, make
sure wheels spin as shown in diagrams C and D.) Pound Axle Caps onto uncapped
ends of Spinner Axle using a mallet or piece of wood. (Diagram D)
Step 5
Repeat Step 4 using second Spinner Axle and the two remaining Spinner Wheels to
assemble the front Spinner.
Step 6
Drive Ground Stake into ground and insert the non-ferruled end of the Lower
Support Pole into the Ground Stake . Insert Upper Pole of assembled Dune Buggy
Spinner into the ferrule. (Diagram E)
Dune Buggy Body
Dune Buggy Body
Spinner
Axle
"T" Joint
First, slide Spinner
Axle onto
Strut Assembly
Second, tighten
knob on "T" Joint
Spinner
Wheel
Wheels on
same axle
should spin
in opposite
directions
Axle Cap
Slide Spinner
Wheels onto Spinner
Axle, then hammer
Axle Cap onto end
