Premier designs 6.5 Ft. Eagle, Руководство пользователя

Страница: 7 / 17

12 13
STEP 4: Transmitter Power-Up & Battery Installation
IMPORTANT: ALWAYS TURN TRANSMITTER “ON” FIRST BEFORE POWERING UP VECTOR KITE™. ALWAYS
DE-POWER VECTOR KITE™ BEFORE TUNRNING TRANSMITTER OFF.
Make sure throttle control is all the way back (down). Make sure all trim controls are in the 1.
middle position.
Turn the transmitter on. 2.
Plug in battery to Vector Kite.™ 3.
Throttle
Control
Trim
Controls
Turn Power
Switch to
'ON' Position
Connect 2 Conductor
Plug to
2 Conductor Socket
TOP VIEW
STEP 3: Receiver & Antenna Installation
NOTE: MANY DIFFERENT STYLES OF RECEIVERS CAN MOUNT ON YOUR 840 VECTOR POWER UNIT.
THE MOST COMMON WAY TO MOUNT THE RECEIVER TO THE POWER UNIT IS BY USING VELCRO.
Adhere the 'soft' side of a small Velcro patch to the back of the receiver. 1.
Mount the receiver to the panel of 'hook' side Velcro installed on the Power Unit. 2.
Plug ESC and Servos into their proper receiver ports (see diagram). 3.
IMPORTANT: ALWAYS MAKE SURE YOUR ANTENNA IS WELL CLEAR OF ALL PROPELLER POSITIONS
WHEN GIMBAL IS OPERATED!
Typical Receiver (Manufacturers may vary, consult your Transmitter/Receiver Owners Manual)
Receiver Port 3
Throttle and Power
(Typically Throttle ESC)
Receiver Port 2
Up/Down Gimbal Servo
(Typically CH-2 Elevator Servo)
Receiver Port 1
Right/Left Gimbal Servo
(Typically CH-1 Aileron Servo)
Suggested Receiver
Placement