Premier designs 6.5 Ft. Eagle, Руководство пользователя

Страница: 3 / 17

4 5
2
3
Slide the end of the Underwing Spreader with the small hook through the
hole in the sail. Connect the other end of the Spreader into the Fitting on
the Leading Edge. Repeat with second Underwing Spreader on other side.
Flip the kite over and insert remaining ends of both Underwing Spreaders
into the Dihedral. Make sure the tip (bottom of the 'V') of the Dihedral is
pointing towards the front of the kite.
Hook on
Underwing
Spreader
Leading
Edge Fitting
Keep Underwing Spreader
in front of Wing Batten
Connect Underwing
Spreader to Dihedral
Incorrect Dihedral Position
Correct Dihedral Position
5
Slide the Tail Wand into the sleeves on the sides of the tail. Tail Wand
should be behind the Spine.
Insert the uncapped end of the Tail Strut into the Spine Ferrule and
the capped end of the Tail Strut into the pocket at the base of the tail.
Tail should point upward.
4
Slide Tail Wand
into Sleeves
Tail Wand should
be behind Spine
Insert uncapped end of
Tail Strut into Ferrule
Insert capped end of
Tail Strut into Pocket
Correct Tail Position
Incorrect Tail Position
IMPORTANT!