3. Product Description
Features
•
Large 6.8ltr capacity water tank
•
Transparent water tank
•
Easily Transportable due to unitary construction
•
Warm humidity function (After approximately 60 minutes a mist
temperature of 30 degrees C is obtained.)
•
Ultrasonic cool mist
•
Fresh ionic generator
•
Water filter (Ion Exchange Resin)
•
Adjustable nozzle
•
Mist output: 350-550ml/hr
ON
OFF
ON
OFF
Handle
Tank
Water Filter
(inside tank)
Control Panel
Base
Ionizer Outlet
Nozzle
Pre-Operation Instructions
1. Carefully remove your humidifier from the box (please save the carton
for off-season storage).
2. Remove tank and check for damage.
3. Place on firm watertight level surface.
4. Caution
1. Please read the instructions carefully before using the
humidifier.
2. Please make sure that the humidifier is placed on a solid,
waterproof surface. Do not allow the unit to come into contact
with soft furnishings or polished wood surfaces.
3. Turn off and plug must be pulled out of the socket while adding
water or moving the humidifier.
4. Do not immerse the unit in water.
5. Cut off the power when the water tank is empty.
6. Do not use hot water.
7. Clean and de-scale the unit regularly.
5. Operation
FILLING WATER
Disinfect the humidifier when you use the humidifier for the first
time (please refer to the cleaning instructions)
1. Turn off and unplug the humidifier.
2. Remove nozzle.
3. Lift water tank from base.
4. Turn over the water tank than open filling hole cap of water tank by
unscrewing anti-clockwise and fill tank with clean cold water only.
5. Close filling hole cap by screwing clockwise.
6. Turn over the water tank to upward. Make sure that it does not leak.
Put water tank back on base.
7. Put nozzle back to water tank and adjust the desired direction.
Attention:
1. Use the under-side care handle when carrying the fully filled water tank
and place another hand under for assistance.
2. Do not put water into the base directly otherwise it will be damaged or
cause danger.
3. Do not move the appliance when the water tank is fully filled with water.
4.
Place on firm watertight level surface.
