IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product for future reference.
BEFORE USE
You must inspect the appliance including its cable and plug for any signs of damage. If the product is
damaged, DO NOT use it, and contact your supplier immediately.
PRODUCT SAFETY
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Do not cover. This symbol shown on the casing of the radiator means that the radiator should not be covered.
For indoor use only.
• Do not use in bathrooms, wet rooms or other damp locations.
• Do not use this product with an extension lead
• Not intended for use in Boats, Caravans or other similar locations.
• Please allow for a 50 cm safe area around the top and sides.
• Do not place the mains lead beneath a carpet or rug.
• Please ensure the radiator is not positioned below a socket outlet.
• Do not use the radiator in locations where paint, petrol or other flammable liquids are used or stored.
• Please ensure the radiator is switched off and unplug when not in use, also keep unplugged before assembly or disassembling
parts.
• Do not use the radiator for other than its intended use.
• Do no insert any object into the radiator through the grilles. This may damage the radiator or result in overheating or
electric shock.
• Check the product regularly including the mains lead for damage. If any damage is detected stop using it immediately and
consult your supplier.
• Only use this product on a flat, stable surface.
• Do not leave this product unattended when in use.
• For domestic use
• There are no user serviceable parts in this product
• Allow to cool down before moving
• This heater is filled with a precise quantity of special oil. Repairs requiring opening of the oil container are only to be made
by the manufacturer or his service agent who should be contacted if there is an oil leak;
• When scrapping the heater, follow the regulations concerning the disposal of oil.
2
INSTALLATION OF FEET (FRONT)
Before attempting to fit the feet turn the appliance upside down and place on a flat firm surface. Holding
the product securely attach the front castor bar (the front castor bar has 5 holes) to the unit making
sure that the locator pin aligns with the locator hole (see fig. 1). Make sure that the screw hole aligns
with the threaded bolt (see fig. 2) and secure tightly using wing nut (see fig. 3).
Fig. 1
Fig. 2
Fig. 3
