Page 6
OPERATION
Leave the appliance in an upright position for 3 hours before first use.
Plug the mains lead into a 13 Amp mains socket (unless permanently installed)
If connecting via an extension lead, make sure that the lead is rated at 13 Amps
or more, and that it is fully unwound.
Switch the unit on at the mains socket.
This unit can be operated from the front panel or via the supplied remote control.
Power Button:
Press the
/ Power button to start the unit. The
indicator
illuminates when the appliance is ON. There will be a short delay (of about a
minute) before the appliance starts to operate.
/ MODE Button:
Select the mode by pressing the
/ MODE
button. The
available modes are: COOL
– DEHUMIDIFY (DRY) – HEAT – FAN – ENERGY
SAVING
/COOL mode:
Cools the room to the desired temperature as set on
the remote control or panel using the
or
buttons. The temperature
can be set between 16
C and 30
C (60
F - 86
F) and the fan speed can
be adjusted using the
/
FAN
buttons, the display will show the fan
speed as /Lo, /Med and /Hi.
/Dry mode:
removes humidity (dehumidify), but does not affect room
temperature. The fan operates at its lowest speed shown as
. For best
Fan Speed
Timer
Up
Mode
Down
Power
Display Window
Auto Swing
Sleep
Auto Clean
Remote Control