Page 10
a. Remove heat exhaust hose by pushing the clips on the rear
socket to the side with your thumbs and clean with a soft cloth
b. Drain the condensate tank as per the instructions on page 4.
c.
Run the unit in fan only mode for 12 hours to dry out the unit
interior.
d. Turn off the unit and neatly wrap the power lead round the
storage hooks at the rear of the unit and store the plug in the
storage socket on the reverse of the unit
e. Remove batteries from remote control and store in the remote
control storage compartment on the side of the unit.
If the mains lead is damaged, it must be replaced by the manufacturer or an
authorised service centre. If the mains plug needs to be replaced,
proceed as
follows:
Connect the brown wire to the terminal
labelled "L".
Connect the blue wire to the terminal
labelled "N"
Connect the green/yellow wire to the
terminal labelled with the earth symbol
or "E".
Make sure that the cord-grip is
positioned correctly (over the outer sheath of the cable) and it fully tightened.