Predator 63078 Скачать руководство пользователя страница 5

Page 5

For technical questions, please call 1-888-866-5797.

ITEM 63078 

        

SAFETY

Op

ERA

TION

M

AINTENANCE

SETU

p

Operating precautions

1. 

CARBON MONOXIDE HAZARD 

Using a generator indoors  

CAN KILL YOU IN MINUTES. 

Generator exhaust contains 

carbon monoxide.  This is a poison 

you cannot see or smell. 

NEVER use inside a home or garage,  

EVEN IF doors and windows are open. 

Only use OUTSIDE and far away from windows, 

doors, and vents.

2.  Never use a generator indoors, including in 

garages, basements, crawl spaces and sheds.  

Opening doors and windows or using fans will NOT 

prevent carbon monoxide build up in the home.

3.  When using generators, keep them outdoors 

and far away from open doors, windows, 

and vents to avoid toxic levels of carbon 

monoxide from building up indoors.

4.  If you start to feel sick, dizzy, or weak while 

using a generator, get to fresh air right away.  

The carbon monoxide from generators can 

quickly lead to full incapacitation and death.

5.  Keep children away from the equipment, 

especially while it is operating. 

6.  Keep all spectators at least six feet 

from the Engine during operation.

7.  Fire Hazard! Do not fill fuel tank while engine is 

running.  Do not operate if gasoline has been spilled.  

Clean spilled gasoline before starting engine. 

Do not operate near pilot light or open flame.

8.  Do not touch engine during use. 

Let engine cool down after use. 

9.  Never store fuel or other flammable 

materials near the engine.

10. If the plugged in product operates abnormally 

or unusually slow, immediately stop using the 

generator as a power source.  Read and adhere 

to the instruction manual of the product to be 

powered to make sure that it can be safely and 

efficiently powered by a portable generator.

11.  Before connecting an appliance or power cord 

to the generator:  Make sure that it is in good 

working order.  Faulty appliances or power cords 

can create a potential for electrical shock.

12. Do not exceed the maximum power rating of the 

generator.  Make sure that the total electrical rating 

of the all of the tools or appliances plugged into 

the generator at the same time does not exceed 

that of the generator.  Check that the startup surge 

will not be beyond the limit of the Generator. 

13. Avoid substantially overloading which will trip 

the circuit breaker.  Slightly overloading the 

generator may not trip the circuit breaker, 

but will lead to premature generator failure.

14. Do not attempt to connect or disconnect 

load connections while standing in water, 

or on wet or soggy ground.

15. Do not touch electrically energized parts of 

the Generator and interconnecting cables 

or conductors with any part of the body, or 

with any non-insulated conductive object.

16. Connect the Generator only to a load or 

electrical system (120 volt or 240 volt) that is 

compatible with the electrical characteristics 

and rated capacities of the Generator.

17. 

GFCI pRECAUTIONS 

Test Ground Fault Circuit Interrupter (GFCI) 

receptacles before each use as follows:

a.  Disconnect all devices from the Generator.
b.  Start the engine.
c.  Press Test button on receptacle 

to trip the GFCI device.

d.  The Reset button should extend, cutting 

off electricity to the receptacle.

e.  If above test fails, do not use receptacle 

until it is repaired or replaced.

f.  Press Reset button in for use.

GFCI receptacles will not protect against 

electric shock if Generator is not grounded.  

Refer to 

Grounding

 on page 15.

18. Insulate all connections and disconnected wires.

19. Guard against electric shock.  Prevent body contact 

with grounded surfaces such as pipes, 

radiators, ranges, and refrigerators.

Содержание 63078





































Отзывы: