Predator 63022 Скачать руководство пользователя страница 4

Page 4

For technical questions, please call 1-888-866-5797.

ITEM 63022 

        

SAFETY

SETU
p

Op
ERA
TION

M

AINTENANCE

Operating precautions

1. 

Buried utility lines may be unmarked; contact 

utility companies before drilling.

  Contacting utility 

lines may cause severe personal injury or death.

2. 

Check for landscape fabric before drilling.   

Landscape fabric may get pulled into the Bit 

and also pull the operator into the Bit. 

Before drilling, cut a hole in the landscape fabric 

sufficiently larger than the diameter of the Auger to 

prevent contact or entanglement with the fabric.

3. 

Keep everyone other than the operator 

at least 10 feet from the Auger during operation. 

 

people using hand tools should not move or 

remove soil-pile while the Auger is operating. 

Always keep children away from the Auger,  

especially while it is operating.

4.  To prevent severe personal injury or 

dismemberment from rotating Bit:  

Stand on flat, level, solid surface and brace 

against torque during use.  Keep hands and feet 

away from Bit and hole when Engine is running.

5. 

CARBON MONOXIDE HAZARD 

Using an engine indoors  

CAN KILL YOU IN MINUTES. 

Engine exhaust contains 

carbon monoxide.  This is a poison 

you cannot see or smell. 

NEVER use inside a home or garage,  

EVEN IF doors and windows are open. 

Only use OUTSIDE and far away from windows, 

doors, and vents.

6.  Do not lock trigger on.  

Never disable safety switches or components.

7. 

Maintain a firm grip on the Auger 

with both hands and be aware of the 

strong start-up torque of the tool.

8.  Disconnect and insulate spark plug wire 

before maintenance and/or changing bits.

9.  Do not carry between holes with Engine running. 
10. Carry by handle only; not by Bit.
11. 

Keep your thumb near the power Switch in the 

event the Auger must be turned off immediately.

12. 

Do not use the Auger if the Bit 

is dull, bent, or damaged.

13. 

Drill with the Engine running at full speed.   

Fully squeeze the Throttle to maintain 

a steady drilling speed.

14. 

When shutting off the Engine, make sure the 

Auger has stopped before setting the tool down.

15. Keep children away from the Auger, 

especially while it is operating. 

16. Keep all spectators at least six feet 

from the Engine during operation.

17. Fire Hazard! Do not fill fuel tank while engine is 

running. Do not operate if gasoline has been spilled. 

Clean spilled gasoline before starting engine. 

Do not operate near pilot light or open flame.

18. Do not touch engine during use. 

Let engine cool down after use. 

19. Never store fuel or other flammable 

materials near the engine.

20. Only use a suitable means of transport and 

lifting devices with sufficient weight bearing 

capacity when transporting the Auger.

21. Secure the Auger on transport vehicles to 

prevent it from rolling, slipping, and tilting.

22. Industrial applications must follow 

OSHA requirements.

23. Do not leave the Auger unattended when it is 

running.  Turn off the Auger (and remove safety 

keys, if available) before leaving the work area.

24. 

The Auger can produce high noise levels.

  

Prolonged exposure to noise levels 

above 85 dBA is hazardous to hearing. 

Wear ear protection when operating the Auger 

or when working nearby while it is operating.

25. Wear ANSI-approved safety glasses, hearing 

protection, and NIOSH-approved dust mask/

respirator under a full face shield along 

with steel-toed work boots during use.

26. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 

close proximity to a heart pacemaker could cause 

pacemaker interference or pacemaker failure.  

Caution is necessary when near the 

engine’s magneto or recoil starter.

27. Use only accessories that are recommended by 

Harbor Freight Tools for your model.  Accessories 

that may be suitable for one Auger may become 

hazardous when used on another Auger.

28. Do not operate in explosive atmospheres, 

such as in the presence of flammable 

liquids, gases, or dust.  Gasoline-powered 

engines may ignite the dust or fumes.

29. Stay alert, watch what you are doing and 

use common sense when operating this 

Auger.  Do not use while tired or under the 

influence of drugs, alcohol or medication.

Содержание 63022

























Отзывы: