Page 9
For technical questions, please call 1-888-866-5797.
ITEM 62548
Sa
FET
y
SET
up
Op
Era
Ti
O
n
Main
TE
nan
CE
Manual Start
1. To start a cold engine, move the Choke to the
START position.
To restart a warm engine, leave the Choke in the
RUN position.
2. Open the Fuel Valve.
3. Rotate the Throttle Control clockwise to
halfway between the low and high position.
4. Turn the Engine Switch on.
5. Grip the Starter Handle of the Engine loosely and pull
it slowly several times to allow the gasoline to flow into
the Engine’s carburetor. Then pull the Starter Handle
gently until resistance is felt. Allow Cable to retract fully
and then pull it quickly. Repeat until the Engine starts.
note:
Do not let the Starter Handle snap back against
the Engine. Hold it as it recoils so it doesn't hit the Engine.
1
2
3
4
On
5
