Predator 58169 Скачать руководство пользователя страница 27

Страница: 27 / 28

Page 27

For technical questions, please call 1-888-866-5797.

ITEM 58169

SAFETY

SETU

ERA

TION

AINTENANCE

WHAT IS COVERED?

The following parts are examples of components of the emissions control system

and are covered by this two (2) year warranty. For a full list of emissions control

components covered by this warranty, please see 40 CFR §1068, Appendix I.

1. Fuel Metering System

a.  Carburetor and its internal parts.
b.  Fuel pump (if so equipped).
c.  Cold start enrichment system.

2. Air Induction System

a. Intake pipe/manifold.
b. Air cleaner.

3. Ignition System

a. Spark plug.
b. Magneto ignition system.

4. Catalyst System (if so equipped)

a.  Exhaust pipe stud.
b.  Muffler.
c.  Catalytic converter (if so equipped).

5. Miscellaneous Items Used in Above Systems

a. Vacuum, temperature and

time sensitive valves and switches.

b. Hoses, belts, connectors, and assemblies.

This warranty does not cover normal maintenance services or replacement

of maintenance items such as filters, oils, or spark plugs.

WHAT YOU MUST DO TO OBTAIN WARRANTY SERVICE

As the engine owner, you are responsible for the performance of the required maintenance

listed in your Owner’s Manual. HFT may deny you warranty coverage if your engine or a

part has failed due to abuse (including failure to follow the fuel use instructions contained

in this manual), neglect, improper maintenance, or unapproved modifications.

In order to obtain warranty repair or replacement, you may either (a) contact HFT product support at

1-888-866-5797 or [email protected]; or (b) bring the to your nearest Harbor Freight Tools

retail store. When going to the retail store or contacting product support, you must indicate the specific

emissions control part or defect that you are claiming and the date this was originally purchased. The nearest

Harbor Freight Tools retail store can be found on the internet at http://www.harborfreight.com.

Содержание 58169





























Результаты поиска

Содержание 58169

Отзывы:

Похожие инструкции для 58169

Бренды по названию

Популярные бренды

Predator 58169, Руководство пользователя и инструкции по безопасности

Результаты поиска

Содержание 58169

Отзывы:

Похожие инструкции для 58169

Бренды по названию

Популярные бренды