Page 8
For technical questions, please call 1-888-866-5797.
ITEM 60363
SAFETY
Op
ERA
TION
M
AINTENANCE
SETU
p
Starting the Engine
Before Starting the Engine
Before starting the engine:
a.
Follow the Set Up Instructions in the equipment manual to prepare the equipment.
b.
Inspect the equipment and engine.
c.
Fill the engine with the proper amount and type of both fuel and oil.
d.
Read the Equipment Operation section in the equipment manual.
1. To start a cold engine, move the Choke to the
CHOKE position.
To restart a warm engine, leave the Choke in the
RUN position.
2. Open the Fuel Valve.
3. Slide the Throttle or Speed Control Lever to 1/3
away from the SLOW position (the “turtle”).
Note:
Some tools have a Speed Control Lever located
elsewhere on the tool which functions the same as the
Throttle. Use the Speed Control Lever in place of the Throttle
when the tool is so equipped.
4. Turn the Engine Switch on.
CHOKE RUN
1
2
3
ON
OFF
O
I
ON
4
OFF
ON
