background image

Page 19

For technical questions, please call 1-888-866-5797.

ITEM 60363 

          

SAFETY

Op

ERA

TION

M

AINTENANCE

SETU

p

Warranties

Emission Control System Warranty

United States Emission Control 

Defects Warranty Statement

The United States Environmental Protection Agency (herein 

EPA) and Harbor Freight Tools (herein HFT) are pleased to 

explain the emission control system warranty on your 2014-2015 

Small Off-Road Engine (herein engine). within the United States, 

new off-road, spark-ignition engines certified for model year 

2014-2015, must meet similar standards set forth by the EPA.  

HFT must warrant the emission control system on your engine 

for the periods of time described below, provided there has been 

no abuse, neglect or improper maintenance of your engine.

Your emission control system may include parts 

such as the carburetor or fuel-injection system, and 

the ignition system. Also included may be hoses, belts, 

connectors and other emission-related assemblies.

Where a warrantable condition exists, HFT will repair your 

engine at no cost to you including diagnosis, parts and labor.

Manufacturer’s Warranty Coverage

The 2014-2015 engines are warranted for two (2) 

years.  If any emission-related part on your engine is 

defective, the part will be repaired or replaced by HFT.

Harbor Freight Tools Emission Control 

Defects Warranty Coverage

Engines are warranted for a period of two (2) years relative 

to emission control parts defects, subject to the provisions 

set forth below. If any emission related part on your engine is 

defective, the part will be repaired or replaced by HFT.

 

Owner’s Warranty Responsibilities

•  As the engine owner, you are responsible for the performance 

of the required maintenance listed in your Owner’s Manual. 

HFT recommends that you retain all receipts covering 

maintenance on your engine, but HFT cannot deny warranty 

solely for the lack of receipts or for your failure to ensure 

the performance of all scheduled maintenance.

•  As the engine owner, you should, however, be aware 

that HFT may deny you warranty coverage if your engine 

or a part has failed due to abuse, neglect, improper 

maintenance, or unapproved modifications.

•  You are responsible for shipping your engine to a HFT warranty 

station as soon as a problem exists.  Contact the HFT Customer 

Service department at the number below to make shipping 

arrangements.  The warranty repairs should be completed 

in a reasonable amount of time, not to exceed 30 days.
If you have any questions regarding your warranty 

rights and responsibilities, you should contact the 

Harbor Freight Tools Customer Service Department at 1-888-866-5797.

Harbor Freight Tools Emission Control 

Defects Warranty provisions

1.  Length of Coverage

HFT warrants to a first retail purchaser and each 

subsequent purchaser that the engine is free from 

defects in materials and workmanship that cause the 

failure of warranted parts for a period of two (2) years 

after the date of delivery to the first retail purchaser.

2.  No Charge Repair or Replacement

Repair or replacement of any warranted part will be performed at 

no charge to the owner if the work is performed through a warranty 

station authorized by HFT.  For emissions warranty service, 

contact the HFT Customer Service Department at 1-888-866-5797.

3.  Consequential Damages Coverage

Coverage under this warranty shall also extend to the failure 

of any engine components caused by the failure of any 

warranted part while it is still covered under this warranty.

4.  Coverage Exclusions

Warranty claims shall be filed in accordance with the provisions 

of the HFT warranty policy explained in the box at the top of the 

previous page.  HFT shall not be liable for any loss of use of 

the engine, for any alternative usage, for any damage to goods, 

loss of time, or inconvenience.  Warranty coverage shall also be 

excluded for any part which fails, malfunctions, or is damaged 

due to failure to follow the maintenance and operating instructions 

set forth in the Owner’s Manual including, but not limited to:
a)  Use of parts which are not authorized by HFT
b)  Improper installation, adjustment or repair of 

the engine or of any warranted part unless 

performed by an authorized warranty center

c)  Failure to follow recommendations on fuel 

use contained in the Owner’s Manual

d)  Improper or inadequate maintenance of any warranted parts
e)  Repairs performed outside of the authorized 

warranty service dealers

f) 

Alterations by changing, adding to or 

removing parts from the engine.

5.  Service and Maintenance

Component parts which are not scheduled for replacement 

as required maintenance or are scheduled only for regular 

inspection to the effect of “repair or replace as necessary” 

are warranted for the warranty period. Any warranted part 

which is scheduled for replacement as required maintenance 

is warranted for the period of time up to the first scheduled 

replacement point for that part.  Any replacement part, provided 

it is equivalent in durability and performance, may be used 

in performance of maintenance or repairs.  The owner is 

responsible for commissioning a qualified technician/mechanic 

to perform all required maintenance, as outlined in the 

Inspection, Cleaning, and Maintenance section in this manual.

6.  Warranted parts

1)  Fuel Metering System

i) 

Carburetor and its internal parts.

ii)  Fuel pump (if so equipped).
iii)  Cold start enrichment system.

2)  Air Induction System

i) 

Intake pipe/manifold.

ii)  Air cleaner.

3)  Ignition System

i) 

Spark plug.

ii)  Magneto ignition system.

4)  Catalyst System (if so equipped)

i) 

Exhaust pipe stud.

ii)  Muffler.
iii)  Catalytic converter (if so equipped).

5)  Miscellaneous Items Used in Above Systems

i) 

Vacuum, temperature and time 

sensitive valves and switches.

ii)  Hoses, belts, connectors, and assemblies.

Содержание Pacific Hydrostar 212cc Gasoline Powered Clear Water Pump





















Отзывы: