©2019 Precor Inc. | Prone Leg Curl RSL 606 | Assembly Guide
5
2
4 M12 x 35 mm SHCS
4 washers, 13 mm
Tool: Hex wrench, 10 mm
Connect main frame to seat frame .
3
Tools: Hex wrench, 10 mm
Socket wrench, 19 mm
Torque wrench
Gently rock the frame to align.
Tighten all M12 fasteners to a torque of
55 ft-lb (75 N-m).
Do not tighten the M10 screws installed in step 1 at this time.
They
will be removed temporarily in a later step.
1
2
1
2
36
43
36 43
36
43
Moving Parts
Image
Hardware
Instructions
1
1 wave washer
1 key
Place wave washer on arm shaft on main frame . Insert key into shaft. Align
and slide on pivot arm .
2
1 end cap
1 M12 x 35 mm FHCS
Tool: Hex wrench, 8 mm
Align hole in end cap with pin on shaft and secure pivot arm.
3
3
32
31
38
30
1
1
30
31
32
38
