Precor Resolute RSL 313 Скачать руководство пользователя страница 9

Страница: 9 / 14

2 bumpers

19 10 lb (4.5 kg) weight plates

1 top plate assembly

Slide one bumper on to each rod. Place the weight plates on the rods. Ensure the
side with three holes face the user side and single hole to the back. Place the top
plate over the weight plates. The plates and top plate should align flush on the

user side.

1 M10 x 65 mm SHCS

2 washers, 11 mm

1 M10 nylon lock nut

Tools: Hex wrench, 8 mm
Socket wrench, 17 mm

1 guide rod with cap

Prepare the lower base for the add-on weight assembly. Place the retaining
screw through the bracket on the weight stack spacer.

Remove the cap from the guide rod and place the rod into bracket opening se-
cured by the screw.

2 bumpers

1 add-on weight spacer, 2½-inch

1 add-on weight

1 add-on weight handle

Place one bumper onto the third guide rod, followed by the add-on weight spac-
er, another bumper, the add-on weight, and the add-on weight handle.

1 counterweight

Place counterweight over front two rods and handle.

13
11

Содержание Resolute RSL 313















Результаты поиска

Содержание Resolute RSL 313

Отзывы:

Бренды по названию

Популярные бренды

Precor Resolute RSL 313, Инструкция по сборке

Результаты поиска

Содержание Resolute RSL 313

Отзывы:

Бренды по названию

Популярные бренды