Precor M9.33i, Руководство пользователя

Страница: 16 / 86

Owner’s Manual: Heart Rate Features 14
Using SmartRate
The SmartRate feature helps you monitor and maintain your
heart rate in the target zone best suited to your specific
needs. All 15 LEDs may light during a workout. When the
treadmill detects a heart rate, a single LED blinks and
indicates the zone that your heart rate is in, either weight loss
or cardiovascular.
The 15 LEDs in the SmartRate display are color-coded. A
pulsating red LED indicates you are outside the
recommended heart rate target zone. Yellow LEDs indicate
when you are exercising within the weight loss zone. Green
LEDs indicate when you are exercising within the
cardiovascular zone.
Refer to Table 1 to see the relationship between the
pulsating LED and your target heart rate.
The SmartRate indicator lights do not appear when:
• You press QUICKSTART at the banner.
• You bypass the AGE prompt.
• You do not wear or improperly position the chest strap.
• You fail to grasp both touch-sensitive handrail grips for five
to ten seconds.
Note: Review the information on the QUICKSTART card that
accompanies your literature packet. It explains how to adjust
the chest strap.
Table 1. Heart rate target zones and SmartRate LEDs
CAUTION: Your heart rate should never exceed 85% of
your maximum aerobic heart rate. If it does, immediately
reduce your speed or, if possible, adjust the incline to
return your heart rate to your physician-recommended
target zone.
Heart Rate Zone
Percent
LED Lit LED Blinking
Below 50 First Red
50 to 54 Second Red
55 to 57 Third Yellow
58 to 60 Fourth Yellow
61 to 63 Fifth Yellow
64 to 66 Sixth Yellow
67 to 69 Seventh Yellow
70 to 71 Eight Green
72 to 74 Ninth Green
75 to 76 Tenth Green
77 to 79 Eleventh Green
80 to 81 Twelfth Green
82 to 84 Thirteenth Green
85 to 87 Fourteenth Red
Above 87 Fifteenth Red
M9.3xi_Owners Manual.book Page 14 Wednesday, December 14, 2005 1:10 PM