FTS Glide Assembly and Maintenance Guide: Assembling the Equipment
12
3.
Remove the guide rod bracket and bumpers and set them aside.
Figure 15: Guide rod bracket and bumper removal
4.
Have your assistant slide the top weight assembly and selector stem off
the guide rods. Ask your assistant to hold the top weight assembly and
guide rods while you install the weights.
Figure 16: Top weight assembly removal
5.
Add the fourteen 10 pound weights and the ten 5 pound weights. Make
sure that the curve on the weight plate faces inside.
CAUTION: The weights are heavy. Handle the weights carefully to avoid
dropping them or injuring yourself. Pick up and place one weight at a
time on the guide rods. Do not angle the guide rods so far that they
dislodge the base bumpers and come out of the base frame.
Note:
Hold your finger over the plastic bushing in each weight to prevent
the bushing from popping out of place.
Figure 17: Weight stack and plastic bushing location
Figure 18: Add weights to guide rods