Precor EFX EFX 821, Сборка и обслуживание: Руководство

Страница: 16 / 48

14
Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer

Begin installation of all fasteners by hand, then partially
tighten them. Do not fully tighten fasteners until
instructed to do so.
Important : When wrench-tightening the screws, make sure
the head of the fastener is parallel to the product surface. If it
is not, stop tightening to avoid cross-threading. To avoid
further damage, stop assembly work and contact Customer
Support.
Installation Requirements
Follow these installation requirements when assembling the
unit:

Assemble the unit near the location where you plan to
use it.

Provide ample space around the unit.

Open space around the unit allows for easier access.

Set up the unit on a solid, flat surface.

A smooth, flat surface under the unit helps keep it level. A
level unit has fewer malfunctions.

Open the box and assemble the components in the
sequence presented in this guide.

The unit is shipped in one box. Ask for help from two or
more people to unpack and assemble the Climber.

Insert all fasteners with your fingers.

Use your fingers to properly align and thread the
fasteners. This helps alleviate cross-threading. Do not
fully wrench tighten fasteners until instructed to do so.
Important : When wrench tightening, the head of the fastener
should be flush with the product. If it is not, cross-threading
may have occurred. Do not attempt to rework the assembly as
more damage to the equipment will occur. Contact Customer
Support. Refer to Obtaining Service.

If you plan to move the unit, obtain help and use a hand
truck.

Do not grasp any plastic parts while lifting or moving the
unit. The plastic parts are not capable of supporting the
weight of the unit and they may break.