background image

Experience Strength™ C-Line Owner’s Manual: Before You Begin

6

Obtaining Service

You should not attempt to service the strength equipment, except for the 
maintenance tasks described in this manual. If any items are missing, 
contact your dealer. If you need more information regarding customer 
support numbers or a list of Precor authorized service centers, visit the 
Precor website at www.precor.com.

If you have any questions regarding a piece of equipment, locate its serial 
number and contact Precor Customer Support. Precor uses the serial 
number to establish the model and year of the product. You can generally 
find the serial number underneath the seat support.

For future reference, write the serial numbers, model numbers, and dates of 
purchase for your Precor strength training equipment in the space provided. 
You may want to list all equipment information below for easy reference.

Model #: 

Serial #: 

Date purchased: 

Model #: 

Serial #: 

Date purchased: 

Model #: 

Serial #: 

Date purchased: 

Model #: 

Serial #: 

Date purchased: 

Model #: _______

Serial #: _______________________

Date purchased: _________________________

Model #: 

Serial #: 

Date purchased: 

Model #: 

Serial #: 

Date purchased: 

Model #: 

Serial #: 

Date purchased: 

Model #: 

Serial #: 

Date purchased: 

Model #: 

Serial #: 

Date purchased: 

Model #: 

Serial #: 

Date purchased: 

Содержание CW34870-101














































Отзывы: